DIAGNOSTICS, RE-PROGRAMMING, ABS BRAKE BLEEDING

As vehicles become more technically sophisticated and require more power consumption for diagnostic and general work-shop maintenance, this can mean only one thing, the strain on the vehicle battery increases. To help support these work-shop environments, battery support units with higher amperage output allow for better performance and consistency with work-shop procedures whilst relying on the vehicle battery.

Bosch is happy to present the BSU2 battery support unit from Traction, this is the big brother to the BSU1 with 25 amp battery support unit that many Ford dealers have today. BSU2 will provide a stable voltage and up to 50 amps (dependant on model) of fully regulated power to prevent loss of charge and damage to the vehicle battery.

BSU2 can be used with any 12V automotive battery including AGM and GEL. When the battery is charged the BSU2 is a regulated power supply to sustain loads and offset parasitic drain.

Can be used in the showroom to maintain the battery charge while power consuming accessories are being demonstrated without fear of power loss.

Reverse polarity protection.

Supplied with 5M IEC power lead.

FEATURES

• BSU2 provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a key On, Engine Off state.


• During diagnostic or programming operations, the vehicle’s systems are operating solely from the vehicle battery. Maintaining battery charge during this process is critical.


• The status of BSU2 is indicated simply by three LED’s – POWER, POLARITY, DEMAND. When all 3 are illuminated, BSU2 is supporting the vehicle battery.


• Designed to be wall or ramp mounted the BSU2 can meet the needs of the high power consuming vehicle.

Specification

• Lead: 4M output leads


• Input: 100-240VAC 50/60Hz


• Output: 13.4V up to 50A continuous


• Weight: 6.5 Kg


• Size: 257 x 160 x 130mm

Scope of delivery

• Battery Support Unit


• 4M output leads (BSU2-50-LS)


• 5M IEC power lead